Micronet-technology SP648B User Manual

User’s Manual EtherFast 10/100M Smart Switch Model No.: SP648B http://www.micronet.info

4VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if a

5 Easy setting via Web Management Utility  Standard 19” Rack-mount size

6 UNPACKING AND INSTALLATION This chapter provides unpacking and installation information for the Switch. Unpacking Open the shipping cartons of the S

7 Figure 1. Combine the Switch with the provided screws Then, use screws provided with the equipment rack to mount each switch in the rack. Figure

8 IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below s

9Rear Panel Figure 4. Rear panel of the Switch AC Power Connector: This is a three-pronged connector that supports the power cord. Plug in the femal

10UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. Figure 5. LE

11Off : No link. SPEED: On (Green) : When the green light is on, the respective port is connected to a 1000Mbps Gigabit Ethernet network. On (Amber)

12CONFIGURATION Through the Web Browser you can configure the Switch such as VLAN, Trunking, QoS… etc. With the attached Web Management Utility, you

13Discovery List This is the list where you can discover all the Web management devices in the entire network. By pressing the “Discovery” button, yo

FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules

14View Trap: The Trap function can receive the events that happen from the Web Management Switch in the Monitor List. There is a light indicator beh

15 The factory default password is "admin". Figure 9. Configuration Setting Password Change: You can use this Password Change when you need

16 Toolbar The toolbar in the Web Management Utility have four main tabs, File, View, Options and Help. In the “File TAB”, there are Monitor Save, M

17Login Before you configure this device, note that when the Web Smart Switch is configured through an Ethernet connection, make sure the manager PC

18 Figure 14. Device Status Setup Menu When the main page appears, find the Setup menu in the left side of the screen (Figure 15). Click on the setup

19Configuring Setup Setting Find that there are four items, including Port Settings, VLAN Settings and Trunk Settings in Setup menu. Port Settings In

20This setting has six modes—100M Full, 100M Half, 10M Full, 10M Half, Auto and Disable—for speed or port disable selections. Note: If speed set to b

21 Figure 20. VLAN Settings Once you want to modify the VLAN Group, check on the ID parameter, the ID VLAN configuration window will pop out. Figure

22Device Status Click on the “Status” to present the device status on this screen, it will show the System Status, Port Status, VLAN Status and Trunk

23 Figure 24. System Setting The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask and Gateway. Through

UL Warning a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the r

24 Figure 26. Trap Setting  System Events: Monitoring the system’s trap. Device Bootup: a trap when booting up the system. Illegal Login: a trap wh

25To restore a current setting file to the device, you must specify the backup file and press “Restore” button to proceed the setting of the recorded

26 TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-SX/LX Gigabit Et

27

i Table of Content ------------------------------------------------------------ About This Guide...

iiConfiguring Setup Setting...19 Port Settings...

1 ABOUT THIS GUIDE Congratulations on your purchase of the 48+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Smart Switch. This device integrates 1000Mb

2 INTRODUCTION This chapter describes the features of the 48+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Smart Switch and some background information

3100Mbps Fast Ethernet is a standard specified by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps Ethernet standard with the ability