User’s Manual 8/16-Port Enterprise KVM Switch Model No.: SP218D/SP226D http://www.micronet.info
2.4 3-in-1 HDB15 Cable Installation On the back of the KVM Switch, each of the 8 /16 PC ports has a HDB15 type connector. Each cable that comes with
2.5 Installation Steps Follow the steps below to setup the hardware: y Plug the 3-in-1 end of the KVM cable to the PC. Connect the HDB-15 connecto
into the electrical receptacle. Now you will see the LED of Port 1 lights up, and hear a beep sound. y Recommended Power On sequence: Monitor, KVM t
Chapter 3 Operation 3.1 Push Button Users can simply switch to a port by pressing the corresponding push button on the LED. For 8 ports KVM Switch,
3.3 Hot Plug The KVM Switch supports “Hot Plug” function for any non-PS/2 connectors. Users may Hot Plug the USB mouse or USB keyboard. y DO NOT ho
¾ First digit refers to the bank numbers used for identifying each KVM in multiple device connections. The last two digits represent the port for ea
This OSD Menu has four types of display screens: 1. Login Window - When powering on this KVM switch, it will prompt a login window and ask for use
3.5.1 Login Window If the Security function is enabled (default is disabled), the Login window will show up waiting for username and password when de
3.5.2 Port Name The first page shows the current port name, the selected port, and the operation hint. Command Description F1 Go to the Main Menu
3.5.3 Language The OSD supports eight languages: English, French, German, Italian, Spanish, Simplified Chinese, Japanese, and Russian. The default la
Certifications FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two condi
3.5.5 Port Search Search the computer by port name. Enter “*” will show all the port names. 3.5.6 User Security There are two types of user levels
3.5.7 Access List Only SUPERVISOR can configure the ACCESS LIST. The first column is the port number, following the server/computer name list. The la
3.5.9 Time Setting When the Auto-Scan function is activated, the KVM switch will auto-scan the host ports one by one according interval setting. Noti
Chapter 4 Troubleshooting y No LED display ¾ Make sure the power adapter is correctly plugged into the KVM Switch. If the LED’s still won’t light,
information that causes the VGA resolution output mismatch with the monitor’s. ¾ In this case, please turn off the PC wait few minute then turn on a
Table of Contents Chapter 1 Introduction... 1 1.1 Package Contents
3.5.6 User Security...16 3.5.7 Access List ...
Chapter 1 Introduction Micronet proudly introduces SP218D/SP226D, 8/16-Port Enterprise KVM Switch. It is ideal for utilizing server or normal PC for
y Support Daisy Chain function with both Bus (8-layer) and Tree (2-layer) topologies y Provide search and naming function for PCs via OSD interface
Chapter 2 Hardware Installation 2.1 Physical Description 8-Port Front View 16-Port Front View 8-Port Rear View 16-Port Rear View 2.1.1 Front
y Daisy Chain: For connecting multiple KVM together. 2.2 Cable Diagram 2.2.1 3-in-1 DB15 Cable One end, HDDB15 (male) connectors with another end
2.3 Rack Mount Installation Before installation, please make sure all of peripherals and computers have been turned off. Find a convenient place to p
Comments to this Manuals