MicroNet Technology SP916GK User Manual download pdf (Page 8)

- 5 -

2. Installing and Using Wireless Router

This Chapter provides a step-by-step guide to the installation and configuration of

the Wireless Router. We suggest you go over the whole chapter before doing more

advanced operation.

2.1 Network configuration setup

Steps to build up the network:

Step1. Connect the ADSL or Cable modem to the Ethernet WAN port on the back of

the Wireless Router by using the UTP cable.

Step2. Connect the phone line from the wall socket to the line-in port on the ADSL

modem, or the coaxial cable to the line-in port on the Cable modem.

Step3. Plug in the power adapter to the modem and turn on the power. Install the

Ethernet card into the computer by referring to the User Guide that came with

the card.

Step4. Connect the computer to the Wireless Router by using standard twisted-pair

Ethernet cable from the computer’s Ethernet card to a 10/100Mbps Ethernet

port on the back of the Wireless Router.

Step5. Plug in the power adapter to the Router and the other side to the wall outlet.

2.2 Computer configuration setup

In order to communicate with this Wireless Router, you have to configure the IP

addresses of your computer to be compatible with the device. The router supports

DHCP server, which is enabled as default. Users using “Obtain an IP address

automatically” to configure IP address may skip the following IP configuration

instruction section.

Note:

1. The default network setting of the device:

IP address: 192.168.1.1

Subnet Mask: 255.255.255.0

DHCP Server: enabled

2. In the following TCP/IP configuration guide, the IP address “192.168.1.2 ” is

assumed to be your IP address if you want to specify IP addresses manually.

Please DO NOT use 192.168.1.1 as the IP address for 192.168.1.1 has been set

as the default IP for this device.

3. The following TCP/IP configuration guide uses Windows XP as the presumed

operation system.

Procedures to configure IP addresses for your computer

1. If you are in Classic Start menu view, click StartÆSettingsÆControl

PanelÆNetwork Connections.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

No comments

MicroNet Technology SP916GK User Manual Page 8