MicroNet Technology SP916GK User Manual download pdf (Page 23)

- 20 -

Attain DNS

automatically:

If your DNS provided by ISP is dynamic, choose

“Attain DNS automatically

Set DNS Manually

To specify the DNS, enter the DNS provided by your

ISP in DNS 1 2 3.

PPPoE Mode

User Name, password

and service name

Fill in the User Name, password and service name

that provided by your ISP.

Connection Type

“Continuous” is for Always keeping connection

“Connect on demand” is for billing by connection

time. You can set up the Idle time for the value

specifies the number of time that elapses before the

system automatically disconnects the PPPoE

session.

“Manual” is to connect to ISP manually. Click

“Connect” from the WEB user interface. The WAN

connection will not disconnect due to the idle

timeout. If the WAN line breaks down and later links

again, the router will not auto-connect to the ISP.

Idle Time:

Defines the amount of idle time that elapses before

the system automatically disconnects the PPPoE

session.

MTU Size

Enable the Maximum Transmission Unit of the

router. Any packet greater than this number will be

chopped up into suitable size before sending. The

larger the number, the better transmission

performance. Enter your MTU number in the text-box

to set the limitation.

Attain DNS

If your DNS provided by ISP is dynamic, choose

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

No comments

MicroNet Technology SP916GK User Manual Page 23